Feb 07, 2018

Free Float Handguard

Tacticool22 introduced their first line of #tactical #handguards, initially focusing on the highly-popular #Smith&Wesson M&P15-22 platform. The Smith & Wesson M&P15-22 Free Float Handguard by Tacticool22 is a highly-engineered piece that fits tightly against the M&P15-22 receiver, eliminating the gap commonly seen between the receiver and other handguards. These are also more rigid than the factory plastic handguard to help retain accuracy.


The split-top Picatinny rail at the 12 o'clock position significantly reduces weight, while still enabling the shooter to bridge optics on the rear of the receiver or install front sights. The handguard also features M-LOK® accessory slots at the 3, 6, and 9 o'clock positions, and 3 limited rotation, push button sockets at the front in the 3, 6, and 9 o'clock positions. “We're excited about our new handguard because it fills the need for an aluminum free float handguard for the M&P15-22. We've had many requests over the years, so this handguard is long overdue,” says Jody Scott, Owner of Tacticool22. “Our handguard adapters have always been great sellers, and we decided it was time to also make the best handguard available to fit the reputable M&P15-22.”


Features: Free float handguard, Fits the Smith & Wesson® M&P®15-22, Unique cuts to reduce weight M-LOK accessory slots, 3 limited rotation, push button sockets, Barrel nut and mounting hardware included. No “timing” or shims needed., Made in the USA.


Specifications: Material: 6061-T6 aluminum, Finish: MIL-SPEC hard coat anodizing, Inside diameter: 1.36″, Outside width: 1.5″, Height: 2″ from bottom M-LOK flat to the top of the Picatinny rail, Length: 10″, 12.5″, and 15”, Weight (without hardware): 6.2 oz (10″), 7.5 oz (12.5″), and 8.7 oz (15”), Weight of hardware: 2.4 oz.


Compatibility: The included proprietary barrel nut fits the following Smith & Wesson M&P15-22 models: M&P15-22 Gen 1, M&P15-22 Gen 2, M&P15-22 Sport,, Performance Center M&P15-22 Sport, M&P15-22 Pistol, Offered in 10″ (SKU: HG-10MLKRAIL-MP1522), 12.5″ (SKU: HG-12MLKRAIL-MP1522), and 15″ inch (SKU: HG-15MLKRAIL-MP1522) lengths. Includes a barrel nut and mounting hardware. Developed for the M&P15-22 platform, these handguards are backed by 10 years of tactical and AR manufacturing experience, and are on sale now at www.tacticool22.com.


Read More Courtesy of Ammo Land...



Post a Comment

Gun Rodeo LIVEFEED

#GIVEAWAY :
Dec
31st

Krytos Industries has changed the game in firearm titanium applications. Using a titanium slide on your handgun can decrease the total weight by 25% with no negative effects to performance.


Krytos Industries laun
2
355286 views
4 followers
Dec
31st
2
351016 views
4 followers
Dec
31st

Swagger Bipods extend 6 ¾ inches all the way up to 29 inches. Flexible and sturdy this is a great choice if you're in the market for a great Bipod.


With a Swagger Bipod, the fact the buck showed up within range would
2
359754 views
4 followers
Dec
31st

The Firefield AR Multi-Tool has 15 tools in one! That includes: a wire cutter, a hammer surface, a bolt scraper, 4 bits, large flat head, hex wrench, bottle opener, flat knife, small knife, cotter pin puller and metal pick.


2
358621 views
4 followers